SCISSOR HOIST DUMP BODIES

GENERAL

  • 10 gauge construction throughout
  • Dirt shedding , sloped design at side plate and tailgate top
  • Double panel side plates equal over 1/4″ thickness.
  • Full depth 3/16″rear corner pillars incorporate recessed lighting, keyhole banjo eyes and lower tailgate pin receiver.
  • All lighting is LED rubber mounted and NTEA and Federal compliant.
  • 2 1/2″ shorter deck height (9′ only)
  • Mounting height of 9.5″ chassis to floor (9′ only)
  • 10″ board extension pockets ease of install & future optional / custom overhang.
  • Self aligning rear latch release for the top gate pins
  • Integrated tarp hooks
  • DuPont™ Imron® Elite black oven cured paint w/ epoxy primer

FLOOR & UNDERSTRUCTURE

  • 4″ x 5.7# Channel long sills and 3″ channel cross members (9′)
  • 6″ x 8.2# Channel long sills (10′, 10.5′ 11′)
  • 3/16″ Stainless formed 7″ long sills (SS body)
  • 3″ stainless tubing, interlaced cross members (SS body)
  • Two piece 10 gauge floor with 45 degree slopped corners where meets seamless side plate.
  • Greasable Bronze bearings for underbody release mechanisms

TAILGATE

  • Formed 10 gauge inner, outer and end panels.
  • 1″ hardened pins, (1″ Stainless) with plasma cut latch receiving lock fingers
  • Adjustable 1/4” chain for spreading aggregate material & holding gate in down position

CAB SHIELD

  • Bolt on, 10GA (12GA SS) cab protector / overhang, for ease of install & future optional / custom overhang
  • 12″ (1/4 cab) overhang, standard. (8′, 9′, & 11′)
  • Pre punched tarp mounting provisions.
  • Slotted dual windows
  • Stainless body construction (excluding DED0888)
  • 24″ Cab Shield (1/2 cab)
  • Tarp assembly, manual or spring loaded.
  • 3/16″ floor (on 9′ & 10′ only)
  • Coal chute, installed, painted or stainless
  • Backup, running or strobe lights in apron
Model # DED0888 DED09396
DEDS09396
DED10696
DEDS09396
DED11396
DEDS11396
DED09396HD
DEDS09396HD
DED1096
DEDS1096
Length 8′ 9’3″ 10’6″ 11’3″ 9’3″ 10′
Fixed Sides 13″ 13″ 13″ 13″ 18″ 18″
Cab to axle (CA) 60″ CA GM
(pre-2011)
60″ CA GM, FORD,
RAM 3500-5500
86.5″ CA Isuzu &
Chevy Cab Forward
84″ CA GM, FORD,
RAM 3500-5500
60″ CA RAM & FORD,
4500-5500
72″, 84″ CA F-650,
International,
GVW Range 11.5k-13.5K 13K-19.5K 14.5K-19.5K 13K-19.5K 16.5K-19.5K 19.5K-25K
Inside Dim
(L x W x H)
96″ x 78″ x 13″ 111″ x 86″ x 13″ 126″ x 96″ x 13″ 135″ x 86″ x 13″ 111″ x 86″ x 18″ 119.5″ x 86″ x 18″
Mounting Length 91″ to 93″ 106″ to 108″ 121″ to 123″ 130″ to 132″ 106″ to 108″ 117″ to 119″
Body Width 88″ 96″ 96″ 96″ 96″ 96″
Cubic Yards
(level, + 6″, + 6″)
2.2,3.3,4.4 2.6,3.8,5.1 2.9,4.3,5.8 3.2,4.7,6.2 3.6,4.8,6.1 3.9,5.2,6.5
Hoist Capacity 9 ton
Class 20
8 ton
Class 20
10 ton
Class 40
9.5 ton
Class 40
8 ton
Class 20
10.5 ton
Class 40
Dump Angle 50 50 48 48 50 48
Weight (lbs.) 1400 1605 1880 1950 1800 2015
Visit Us On FacebookVisit Us On TwitterVisit Us On InstagramVisit Us On Youtube