SCISSOR HOIST DUMP BODIES

• 10 gauge construction throughout
• Dirt shedding , sloped design at side plate and tailgate top
• Double panel side plates equal over 1/4″ thickness.
• Full depth 3/16″rear corner pillars incorporate recessed lighting, keyhole banjo eyes and lower tailgate pin receiver.
• All lighting is LED rubber mounted and NTEA and Federal compliant.
• 2 1/2″ shorter deck height (9′ only)
• Mounting height of 9.5″ chassis to floor (9′ only)
• 10″ board extension pockets ease of install & future optional / custom overhang.
• Self aligning rear latch release for the top gate pins
• Integrated tarp hooks
• DuPont™ Imron® Elite black oven cured paint w/ epoxy primer

FLOOR & UNDERSTRUCTURE

• 4″ x 5.7# Channel long sills and 3″ channel cross members (9′)
• 6″ x 8.2# Channel long sills (10′, 10.5′ 11′)
• 3/16″ Stainless formed 7″ long sills (SS body)
• 3″ stainless tubing, interlaced cross members (SS body)
• Two piece 10 gauge floor with 45 degree slopped corners where meets seamless side plate.
• Greasable Bronze bearings for underbody release mechanisms

TAILGATE

• Formed 10 gauge inner, outer and end panels.
• 1″ hardened pins, (1″ Stainless) with plasma cut latch receiving lock fingers
• Adjustable 1/4” chain for spreading aggregate material & holding gate in down position

CAB SHIELD

• Bolt on, 10GA (12GA SS) cab protector / overhang, for ease of install & future optional / custom overhang
• 12″ (1/4 cab) overhang, standard. (8′, 9′, & 11′)
• Pre punched tarp mounting provisions.
• Slotted dual windows